Skip to Content

DIY Halloween Trick or Treat Bags with Sticky Spiderwebs + Moving Spiders (eek!)

DIY Halloween Trick or Treat bags for kids

Here’s a spooky DIY Halloween trick or treat bag free pattern with ‘sticky’ spiderwebs and creepy spiders that can move and crawl around. Eek!

DIY Halloween Trick or Treat bags for kids

The sticky spiderwebs on the DIY Halloween trick-or-treat bag are actually thin strips that I cut from VELCRO® Brand fasteners…

DIY Halloween Trick or Treat bag with spiderwebs

…and the spiders have a bit of VELCRO® Brand Sticky Back fasteners on their backs to attach them to the trick-or-treat bag.

Plastic spiders with VELCRO on the back

I’m kind of obsessed with our Halloween candy bowl with painted spiderwebs, so for Elise’s DIY trick-or-treat bag I riffed on the idea to make something interactive for the kids to play with while they collect treats.

I can barely contain how much I love this free DIY trick or treat bag pattern. It is crazy fun to move the spiders around!

DIY Halloween Trick or Treat bag with spiderwebs

Luckily, my partner-in-crime, Buzz Lightyear, wholeheartedly agrees.

Elise in a Buzz Lightyear Halloween costume

The DIY trick or treat bag free pattern has a hard bottom so that your trick-or-treaters can set their bags on the ground without the bag tipping over and spilling candy. Don’t you love this fabric? It’s from Jo-Ann Fabrics and Craft Stores. And thanks very much to VELCRO USA for providing the VELCRO® Brand fasteners.

Bottom of DIY spiderweb trick-or-treat bag

EEK! THE SPIDERS ARE GOING FOR THE CANDY!!

DIY Halloween Trick or Treat bag with spiderwebs

Whew! Luckily, we clearly have a bag full of it. Don’t worry, spiders. We’ll share.

This post contain affiliate links which means that products I recommend may give me a nominal commission at no extra cost to you. Thanks – your clicks help me make more free DIYs!

++++++

Supplies for making a DIY Halloween Trick or Treat Bags with Sticky Spiderwebs + Moving Spiders (eek!):

How to make a for making a DIY Halloween Trick or Treat Bags with Sticky Spiderwebs + Moving Spiders (eek!)

Step 1: Cut your trick or treat bag pattern pieces from fabric

11-1/2″ x 10-1/2″ for outside (cut 2)
11-1/2″ x 10-1/2″ for lining (cut 2)
9″ x 3-1/2″ for outside bottom (cut 1)
9″ x 3-1/2″ for lining bottom (cut 1)
3″ x 18″ for straps (cut 2)
11-1/2″ x 10-1/2″ for interfacing (cut 2, I use drapery lining, it’s my little interfacing trick because it gives a good weight and feel to bags, but you can use a heavy sew-in interfacing if you want)

How to make a DIY Trick or Treat Bag Free Pattern

Had to take a close up of this mini crosshatch fabric. I love it.

How to make a DIY Trick or Treat Bag Free Pattern

Mark a tiny mark on the top of the trick-or-treat bag outside 2-1/2″ from the left and right sides. Do this on both outside pieces. It marks where the bag corner is going to be.

How to make a DIY Trick or Treat Bag Free Pattern

Step 2: Sew the trick or treat bag pattern pieces from fabric

Sandwich the trick or treat bag pieces in this order: interfacing (my drapery lining “interfacing” is shown here), outside pieces right sides together, and the the other piece of interfacing. Sew 1/2″ seams on left and right sides.

How to make a DIY Trick or Treat Bag Free Pattern

Iron bag seams open.

How to make a DIY Trick or Treat Bag Free Pattern

Baste around the top and bottom to make the trick-or-treat bag easier to work with later.

How to make a DIY Trick or Treat Bag Free Pattern

Step 3: Make VELCRO spiderwebs for your DIY Halloween Trick or Treat Bags

Now you’re going to cut VELCRO® Brand Fabric Fusion fasteners into thin strips to make spiderwebs. Grab the loop (soft) side of the fasteners. Tape the ends onto your self-healing mat.

How to make a DIY Trick or Treat Bag Free Pattern

Run your rotary cutter down the edge of your ruler (slowly so the VELCRO® Brand fasteners do not shift). If you’re using VELCRO® Brand Fabric Fusion, you may get some adhesive on your rotary cutter that you’ll need to scrape off.

How to make a DIY Trick or Treat Bag Free Pattern

Here are your webs.

How to make a DIY Trick or Treat Bag Free Pattern

Peel, stick and cut your webs. Here’s my sketch of what I was going for.

How to make a DIY Trick or Treat Bag Free Pattern

Make your webs go around the bag.

How to make a DIY Trick or Treat Bag Free Pattern

It will start to look like this:

How to make a DIY Trick or Treat Bag Free Pattern

Now if you are using VELCRO® Brand Sew-On Fasteners then you’ll want to sew down your webs each time before adding on another piece. I used the iron-on VELCRO® Brand Fabric Fusion though for this. Now start doing your cross pieces.

How to make a DIY Trick or Treat Bag Free Pattern

I did this during nap times so I put heavy books on them between sessions so that they wouldn’t move.

How to make a DIY Trick or Treat Bag Free Pattern

OK, now time to iron to set that adhesive on the VELCRO® Brand Fabric Fusion fasteners. Follow the package instructions and get that iron super hot!

How to make a DIY Trick or Treat Bag Free Pattern

Webs are done. Time to sew.

Step 4: Sew lining and attach to DIY Halloween trick-or-treat bag

Put your lining pieces right-side together and sew 1/2″ side seams.

How to make a DIY Trick or Treat Bag Free Pattern

Take your bottom piece, fold it in half. Fold your bag in half so that you can match the centers. Pin one side.

How to make a DIY Trick or Treat Bag Free Pattern

Sew it and then pin the other side and sew it too.

How to make a DIY Trick or Treat Bag Free Pattern

Now sew the two short sides.

How to make a DIY Trick or Treat Bag Free Pattern

Clip the corners, carefully.

How to make a DIY Trick or Treat Bag Free Pattern

Here’s your bottom. Now repeat the same steps to put your outside bottom in, making sure to sew carefully through your VELCRO fastener webs.

How to make a DIY Trick or Treat Bag Free Pattern

Step 5: Attach trick-or-treat bag outside to the lining

With the lining and outside wrong-side out, match the bottoms and sew one long side.

How to make a DIY Trick or Treat Bag Free Pattern

Then sew the other long side. Cut a piece of plastic (I used to use industrial plastic when I made handbags for sale, but you can use like a Trapper Keeper, or just cardboard like I did this time – just know if you use cardboard that you can’t get the bag wet).

Slip the plastic/cardboard between the bottoms.

How to make a DIY Trick or Treat Bag Free Pattern

And sew the ends to enclose it inside the trick-or-treat bag.

How to make a DIY Trick or Treat Bag Free Pattern

Step 6: Make and attach straps

Now for the trick-or-treat bag straps. I put interfacing in the middle here to make it a little more substantial. Fold it in half, then fold those halves in half again (like the bottom of these two straps) and iron.

How to make a DIY Trick or Treat Bag Free Pattern

Sew close to the edge. A little trick – sew the open edge first, then the folded edge.

How to make a DIY Trick or Treat Bag Free Pattern

Pin the straps onto the trick-or-treat bag, right sides together, and sew close to the edge to secure.

How to make a DIY Trick or Treat Bag Free Pattern

Turn the DIY trick-or-treat bag right side out. Here’s that cute bottom.

How to make a DIY Trick or Treat Bag Free Pattern

Step 7: Sew the top to finish the DIY Halloween trick-or-treat bag

Fold down the outside 1/2″, and fold down the lining 1/2″ and pin together.

How to make a DIY Trick or Treat Bag Free Pattern

Sew close to the edge, making sure to catch the lining as you sew.

How to make a DIY Trick or Treat Bag Free Pattern

Step 8: Make sticky spiders and attach to the web

Cut some VELCRO® Sticky Back hook (scratchy) side and stick onto the back of your spiders.

How to make a DIY Trick or Treat Bag Free Pattern

I used the round coins and just sliced off the sides.

How to make a DIY Trick or Treat Bag Free Pattern

Stick it onto your DIY trick-or-treat bag. Now put on a costume and start knocking on doors!

How to make a DIY Trick or Treat Bag Free Pattern

Feeling inspired? See more DIY Halloween craft projects, costumes, and DIY treat bags.

Like it? Share it!
The nicest way to say you like it is to pin it on pinterest, post a comment, follow Merriment Design on Facebook, pinterest or sign up for monthly emails. Enjoy! 🙂

Copyright stuff: You’re more than welcome to use this free project and tutorial for personal use. Contact me for commercial use and etsy sales.

DIY nursery wall art: Personalized sun prints
Previous
DIY Wall Art: Personalized Sun Prints
Easy DIY Halloween front door decoration: Subtle spiderwebs
Next
DIY Halloween Front Door Decoration: Subtle Spiderwebs
Comments are closed.